SPEC-D Tuning LED Tail Lights now available at whoosh motorsports

[TyphoonFiST]

Support a vendor!

Sent from my SM-N950U1 using Tapatalk

 

[nickstewartroc]

So save a little money, have none of the support that Ron provides and if there's an issue have fun going through eBay and what not. Or support a kickass vendor

 

[ron@whoosh]

I would like tot know what are the main difference between the sold ones by Whoosh and those found it in eBay?

Looks like the same

Not sure if they are the same or not
I purchase my light sets directly from Spec-D so they are actual Spec-D brand
We can’t compete with EBay price but I can tell you I’ve already helped a few Fiesta owners that purchased light sets from other sources that could not disassemble the connector as shown in the write ups here due to the manufacturing and brand differences between eBay and no-brand lights vs Spec-D
Either way you go we will help you out with your purchase

 

[mindmaster]

Not sure if they are the same or not
I purchase my light sets directly from Spec-D so they are actual Spec-D brand
We can’t compete with EBay price but I can tell you I’ve already helped a few Fiesta owners that purchased light sets from other sources that could not disassemble the connector as shown in the write ups here due to the manufacturing and brand differences between eBay and no-brand lights vs Spec-D
Either way you go we will help you out with your purchase

Got your point. Could you rewire the tail lights before shipping?

 

[TyphoonFiST]

Got your point. Could you rewire the tail lights before shipping?

There's a thread on doing this that I wrote....Take some initiative and DIY it. Strive everyday to learn something new or just go drink Brawndo....its got electrolyte in it.

 

[mindmaster]

There's a thread on doing this that I wrote....Take some initiative and DIY it. Strive everyday to learn something new or just go drink Brawndo....its got electrolyte in it.

I know. The point is that he could offer that “service” and justify the price change between Ron vs eBay Sellers. Going further!

 

[TyphoonFiST]

I know. The point is that he could offer that “service” and justify the price change between Ron vs eBay Sellers. Going further!

http://www.fiestastforum.com/forum/threads/16073-Spec-D-LED-Re-pin-how-it-really-goes-down

 

[wlkn]

Here's some. Posting more pics later tonight. Gonna do a quick photoshoot.

Sent from my SM-G955U using Tapatalk

Sick car man! Are these the smoked red or just the red ones?

 

[mindmaster]

What do you think guys, Black ST with Smoke tail lights or red/smoke ? { Iwill pull the trigger soon [emoji4] }

 

[hendrixsrv]

Sick car man! Are these the smoked red or just the red ones?

It's the smoked red ones! Honestly, the best looking one!

Sent from my SM-G955U using Tapatalk

 

[TyphoonFiST]

It's the smoked red ones! Honestly, the best looking one!

Sent from my SM-G955U using Tapatalk

Na man....Red are baller...nice and crisp !

Sent from my SM-N950U1 using Tapatalk

 

[ron@whoosh]

all 3 colors have their place
depends what color FiST you have

I'm working on a 4th color by the way......

 

[power8ce]

TL;DR: Quality, finish, and fitment is excellent. Looks sick on my car. Price is well worth it for me.


I re-pinned wires last night and installed this morning (didn't want to deal w/ the TX summer heat last night). I had no problems getting them flushed. I located the load resister right next to the wire connector. I didn't feel comfortable taping to the light housing itself because of summer heat.

Other thing is it's made in Taiwan and not China. I've had better lucks with stuff made in Taiwan. PowerTorque tools I get from O'Reillys are all made in Taiwan and never had an issue (knock on wood).

I might go back and put some clear silicone around the rubber grommet since I've been reading condensation problem is a hit or miss. Just to be safe.

 

[ron@whoosh]

TL;DR: Quality, finish, and fitment is excellent. Looks sick on my car. Price is well worth it for me.


I re-pinned wires last night and installed this morning (didn't want to deal w/ the TX summer heat last night). I had no problems getting them flushed. I located the load resister right next to the wire connector. I didn't feel comfortable taping to the light housing itself because of summer heat.

Other thing is it's made in Taiwan and not China. I've had better lucks with stuff made in Taiwan. PowerTorque tools I get from O'Reillys are all made in Taiwan and never had an issue (knock on wood).

I might go back and put some clear silicone around the rubber grommet since I've been reading condensation problem is a hit or miss. Just to be safe.

View attachment 17846

great post!
I agree - looks great!

 

[HBEcoBeaST]

So glad I found this thread. I was about to destroy my connectors or wires trying to re pin these things.

Off to get a sewing needle!

Sent from my Pixel 2 using Tapatalk

 

[power8ce]

So glad I found this thread. I was about to destroy my connectors or wires trying to re pin these things.

Off to get a sewing needle!

Sent from my Pixel 2 using Tapatalk

Better off get a pick & hook set from Lowe's. I tried the sewing needle and cursed a lot.

Counting from left... use the hook (third) to pry the inner white piece out. Use needle (first), stick it in to hold it down, pull the wire out.

 

[XanRules]

TL;DR: Quality, finish, and fitment is excellent. Looks sick on my car. Price is well worth it for me.


I re-pinned wires last night and installed this morning (didn't want to deal w/ the TX summer heat last night). I had no problems getting them flushed. I located the load resister right next to the wire connector. I didn't feel comfortable taping to the light housing itself because of summer heat.

Other thing is it's made in Taiwan and not China. I've had better lucks with stuff made in Taiwan. PowerTorque tools I get from O'Reillys are all made in Taiwan and never had an issue (knock on wood).

I might go back and put some clear silicone around the rubber grommet since I've been reading condensation problem is a hit or miss. Just to be safe.

View attachment 17846

Man, smoked looks GOOD on magnetic.

 

[KenST]

all 3 colors have their place
depends what color FiST you have

I'm working on a 4th color by the way......

4th color? Oooooo me likely. I might have to hold off till the new color is announced.


Sent from my iPhone using Tapatalk

 

[TyphoonFiST]

Better off get a pick & hook set from Lowe's. I tried the sewing needle and cursed a lot.

Counting from left... use the hook (third) to pry the inner white piece out. Use needle (first), stick it in to hold it down, pull the wire out.

View attachment 17852

Picks are too big...a sewing needle is used as to NOT mar the connector up or break it. I have a whole thread on the way to use the sewing needle also...

Sent from my SM-N950U1 using Tapatalk

 

[KenST]

Trying to debate if I want Smoked red, smoked, or wait for the 4th color.