16x8" RPF1s ARE IN STOCK! ~ ORDER NOW!

[M-Sport fan]

These will fit fine at stock height and on moderate lowering springs with a 205 to 215 tire.
If you want to run a 225 you may start having issues with the inner fender tab if lowered more than 1" or so. (assuming you're on coilovers at that point)
This largely comes down to tire size, and unfortunately not all 205-225s are created equal so it varies.

We are planning on running the Falken RT660 in a 215/45 and Mountune springs on our car.
The RT660 runs wide and in a 215, is more comparable to other 225s.
Expecting this fitment:
View attachment 32486
From this thread: https://www.fiestastforum.com/threads/advan-rz-16x8-225-45-w-wilwood-bbk-front-rear-fitment.6007/

It would be sweet if you could get Advan to bring in THOSE wheels for our direct fitment.

 

[OAKOS Automotive]

It would be sweet if you could get Advan to bring in THOSE wheels for our direct fitment.

With the right amount of money anything is possible..
Js'n lol

 

[kevinatfms]

This largely comes down to tire size, and unfortunately not all 205-225s are created equal so it varies.
We are planning on running the Falken RT660 in a 215/45 and Mountune springs on our car.
The RT660 runs wide and in a 215, is more comparable to other 225s.
Nolan
OAKOS Automotive

The RT660 is just as wide as any other of the 215 offerings and is actually .1 thinner than the outgoing RT615K+ at 7.5" tread width.

Its also funny that the Federal RS-Pro in a 205/45 is actually WIDER by .2 than the Falken, BFG offerings in 215.

225's(measured at 8" tread width) are the best option but the damn height kills us. Would love a 225(8" tread width) in a 23.5" tall tire(would be between a 40-45 aspect ratio) but no one makes one. So, i guess coilovers are required to prop the car up a bit to clear everything within the fender.

 

[M-Sport fan]

Sadly, most (if not ALL) coil over kits for these cars out there will not even allow you to get the car high enough to clear an, 8" wide, 24.0"/24.1" tall tire.

 

[kevinatfms]

Sadly, most (if not ALL) coil over kits for these cars out there will not even allow you to get the car high enough to clear an, 8" wide, 24.0"/24.1" tall tire.

I plan on putting 225's on mine once i wear my 205s out. I am currently on B8's and Swift springs. Ive measured everything possible from my current setup and i believe it will clear without any "massaging" of anything. The good thing is if i need a little bit of space, the Bilstein B14 kit i already planned on buying can give me a little height back if needed at the top end of its adjustment range.

So ill make a thread when i start the process. The extra 5mm of offset from the RPF's would be more beneficial over my Dekagrams.

 

[M-Sport fan]

^^I wish that you could try them first with the B8/Swift setup, since I have another set of Dekas with 225/45-16 A052s to go on them, and I am worried that they will rub even on the factory suspension.

 

[horchata_muffin]

Any preorder slots still available? By when are they due?

 

[OAKOS Automotive]

Any preorder slots still available? By when are they due?

Still available yes, these are expected to arrive early October.

Shoot me an email or PM and I'll get you setup!

 

[OAKOS Automotive]

Production is finished and the wheels will be headed over from Japan soon!
We are 4 - 6 weeks out from delivery.

Half of the pre-order slots are sold.

 

[t o f u]

Please make these in sbc later on. Would definitely pick up a set

 

[OAKOS Automotive]

Wheels came in this week!!

Taking test fit pics today.. standby.

 

[OAKOS Automotive]

(plz excuse our dirty car)

Here they are!
Tested front and rear and looking great. No concerns with clearance anywhere.


These are now in stock and ready to ship! Shoot me a PM or email about ordering with forum pricing.
Pre-orders have been shipped as well.

 

[DAW]

I dunno man, test fit to me is tires on, and weight on wheels. 🤷🏻‍♂️

 

[OAKOS Automotive]

Kris (@egg_speed on Instagram) has us beat for the first set fully installed on a car!

 

[DAW]

Kris (@egg_speed on Instagram) has us beat for the first set fully installed on a car!


View attachment 35368
View attachment 35366
View attachment 35367
View attachment 35365

Noice!!! What’s the suspension setup on it, tires? Any rub?

 

[OAKOS Automotive]

Noice!!! What’s the suspension setup on it, tires? Any rub?

I believe he is on Meister R coilovers.

No mention of any kind of rubbing.
He said he wants to go lower than it is now, which is a good sign.

 

[Shikari]

Can we get some pictures of front caliper clearance for BBK users?

 

[OAKOS Automotive]

Can we get some pictures of front caliper clearance for BBK users?

The best I have right now are the pics posted above of the dry fit.

What kit are you trying to fit? I will gladly take some measurements.

 

[M-Sport fan]

Any id

I believe he is on Meister R coilovers.

No mention of any kind of rubbing.
He said he wants to go lower than it is now, which is a good sign.

Any idea what size tires he's using? (I cannot read the sizes even with the pics blown up. )

 

[kevinatfms]

Any idea what size tires he's using? (I cannot read the sizes even with the pics blown up. )

Those are Federal RS-Pro's so he is using a 205/45R16. I have the same tire on the same size wheel(Dekagram).