• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Focus RS Forum and Focus RS community dedicated to Focus RS owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Focus RS Forum today!


new goodies on the site and more on the way

Trader history for ron@whoosh (1)

Alkoran

Alkoran

Member
#722
Messages
447
Likes
409
Location
Canada
#722
Alkoran said:
No, and yes.

The centering pieces won't fit inside the pierce bolting cups. What you'll have to do is make some spacer to get the chambered center, which normaly is used for the bolt big washer, flush to the outer edge. Then the pierce bolting cups will sit flat on those spacers/edge. If you try to bolt the bar without some spacers, you won't have a good strong mating surface between the centering kit and the bar cups.
View attachment 55805
Click to expand...
I think I spoke too soon. I just realized that the front cups of the bar that are fastened with the lower control arm bolt will be offset down by the thickness of the centering piece (so approx, 3/8") and I don't think there's enough room to offset the bolt in the cup as it's also a flanged bolt. My bad if someone bought a kit thinking this could fit together without issue.
 


akiraproject24

akiraproject24

1000 Post Club
U.S. Marine Veteran
#729
Messages
1,111
Likes
1,261
Location
Pennsylvania
#729
I am guessing that this is the next step for guys who have already done injectors and high pressure pump?
 


akiraproject24

akiraproject24

1000 Post Club
U.S. Marine Veteran
#736
Messages
1,111
Likes
1,261
Location
Pennsylvania
#736
gtx3076 said:
Any benefit of these over stock?
Click to expand...
cant speak to the metal composition but generally the anti corrosion coatings keep the non braking surfaces from rusting and looking like crap. I ran some zinc coated rotors a while back on another car and it did stop or at least severely slow rust forming on the areas the pads dont wipe clean
 


Dialcaliper

Dialcaliper

Senior Member
#740
Messages
884
Likes
1,458
Location
San Francisco Bay Area
#740
akiraproject24 said:
cant speak to the metal composition but generally the anti corrosion coatings keep the non braking surfaces from rusting and looking like crap. I ran some zinc coated rotors a while back on another car and it did stop or at least severely slow rust forming on the areas the pads dont wipe clean
Click to expand...
Mostly cosmetic to prevent rust buildup (which doesn’t hurt function unless you’ve got extreme road salt in your area). The metal is usually similar to other “high carbon” cast iron rotors.

One note is that coated rotors used in aggressive track situations (high temp, track pads), the coating can “craze” or develop what looks like spider-web fractures in the coating. This is not really a problem unless the coating actually starts coming off. But it can make it more difficult to spot an actual crack in the rotor in the unlikely situation that actually happens.
 


You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
ronniec687 Some new goodies on the whoosh site whoosh motorsports 1
ron@whoosh Performance Parts for SALE (not on our site) whoosh motorsports 21
OAKOS Automotive It already looks great, but it can look better. Exterior goodies for sale at OAKOS! Vendor Deals 47
ron@whoosh whoosh site change thread - we now have categories whoosh motorsports 15
ron@whoosh Pre-Order is live on the site - AET | VUDU shift knob announcement! whoosh motorsports 4
ron@whoosh Diode Dynamics LED Fog Lights (and more) now available on the site! whoosh motorsports 8
ron@whoosh whoosh motorsports shop car day....goodies installed with pics :)))))) whoosh motorsports 26
Chris@CFM Black Friday Sale at CFM Performance **SITE WIDE** Vendor Deals 0
ron@whoosh SCT X4 tuners now available on the site! whoosh motorsports 24
ron@whoosh new category on the site for fun....check it out whoosh motorsports 82

Similar threads

Ford Community Posts



Top